carb to36. how to properly adjust the carb to 36

carb to36. how to properly adjust the carb to 36

  1. how much do I remember this old carb with a separate float chamber, put up to the middle of 80x for mototechnics?
  2. Adjusting the carburetor K-36

    Adjustment is carried out as follows:
    - having turned out screw 12 (fig. 3.4), to establish the minimum possible number of turns of the engine;
    - turn the 24 screw until the engine runs out;
    - smoothly unscrew the screw 24, achieving a clear stable engine performance;
    - with the 12 screw, lower the throttle valve again, reducing the engine speed.
    So, by turning the screws 12 and 24 in this sequence it is necessary to achieve a small stable engine speed at idle.
    After the adjustment, you need to check how the engine behaves when the throttle valve is raised and lowered sharply. If the engine stops working, use the 12 adjusting screw to slightly increase the speed.
    Adjusting the quality of the mixture in the operating modes is done by resetting the metering needle 11 to the next annular groove of the throttle valve up or down.

    carb to36. how to properly adjust the carb to 36 If the engine stops working

    When the needle is raised, the mixture is enriched, and when it is lowered, it becomes depleted.
    Drawing here: voshod.pp.ua The carburetor

Related news

Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36 Carb to36. how to properly adjust the carb to 36